Saltar al contenido

Windows 10 will not start: what are the possible causes

Windows 10 will not start: what are the possible causes

Yes Windows 10 will not start it may be due to various causes. They can range from a specific configuration in which the boot takes place from another device, such as a USB memory, to hardware, software or firmware issues. The truth is that it is a problem that can be frustrating, because not being able to start the computer, it is difficult to find the source of the problem. For this reason, we will see what are the causes and possible solutions to this error.

How to fix the problem when Windows 10 does not start, step by step

Probably seeing that our operating system does not start is one of the most frustrating problems that can arise. Especially when it happens at work or when an important consultation is required, that Windows Startup failure is a serious problem. For this reason, it is necessary to check the faults that can cause it and the most effective solutions to solve them.

one

Start in safe mode

Start in safe mode

One way to fix the problem when Windows 10 doesn’t start is to start from «Safe way«. This type of boot is an alternative way to boot the operating system with reduced software usage.

To enter «Safe Mode», you must turn on your computer and press the F8 key repeatedly until you see that the Options menu appears. Using the arrow keys, select Safe mode and press Enter

If this method of booting your system in «Safe Mode» did not help you, you can access it from Windows safe recovery mode. This method forces the system to start in «Safe Mode».

Two

Check the condition of the laptop battery

Check the condition of the laptop battery

When using a laptop, the battery often causes some problems. If it does not work properly or is not charged enough, it may occur system startup errors.

If you want to check if the problem is due to a poor battery condition, disconnect the computer and remove the battery. Then connect the laptop to a power source. This way you can check if there is another type of error or if there is a problem with the battery condition.

3

Disconnect the USB devices

Disconnect the USB devices

some Windows 10 updates, caused problems connecting USB devices. When this happens, you need to disconnect all peripherals and thus start booting the system.

After disconnecting the USB from the computer, you can restart the system to see if it starts correctly.

4

Check for malware

Check for malware

One of the the main causes of an operating system that no longer works properly it is existence malware. If you suspect this may be the cause, you should turn on your computer from a DVD or USB drive where you installed a antimalware program.

If you boot from this drive, you will be able to activate antimalware detection and detect the problem. When you restart the operating system, if this was the case, you will see how it starts without any problems.

5

Access the Windows 10 bootloader

Access the Windows 10 bootloader

One of the Ways to fix Windows 10 startup problem make a new system installation. However, this action is not always possible, as failures that prevent booting may make it impossible to access the bootloader.

  • To resolve this issue you need to access the file Windows 10 command line. You should start with Advanced Startup. To do this, you must restart three times without letting Windows load. It should detect that there is an error and start with Advanced Boot
  • When you start, you can select Prompt order and type «bcdedit / set {default} bootmenupolicy inheritance«
  • Then you need to restart your computer to access the boot loader interface, and from Safe Mode you can make a new one. Installing Windows 10

6

Disable quick start mode

Disable quick start mode

Quick start mode is an increasingly common option on more advanced computers. This allows the computer to start faster by preloading the device drivers.

However, a system update may corrupt the boot mode. For this reason it is recommended disable quick boot.

To do this, you need to follow the steps below:

  • Turn on the equipment and quickly press the F2 key that will allow us to access BIOS computer
  • Find the Quick Boot option and turn it off

The computer should be able to start smoothly.


Repair Windows startup it is easy as long as there is no serious mistake. By following these simple steps, you can easily troubleshoot Windows 10 startup and detect the error that caused it.

Did you know …

Windows 1.0 cost $ 99 when it was released and included a few small programs, such as a calendar, computer, clock, notebooks, and some games. What we know today as Accessories.

Was it useful to you? Loading …