Saltar al contenido

Operating Systems How to create a bootable USB with multiple operating systems – USB MULTIBOOT If you were wondering how to create a USB with multiple …

Operating Systems How to create a bootable USB with multiple operating systems - USB MULTIBOOT If you were wondering how to create a USB with multiple ...

If you’ve been wondering how I can create a USB with various operating systems? Well, here we will explain in detail, but quickly. So, you can start using this tool without having to have excellent computer knowledge. Having a USB Multiboot is something very interesting today, because with it you can facilitate and reduce the time of processes that are normally long. This includes both the installation of operating systems, the correction of boot errors and even partitioning problems on mechanical disks. For this reason, it is often accompanied by tools such as CHKDSK in case of damage to Windows startup.

What’s the use of having a bootable USB with multiple operating systems?

Multiboting is something very used due to the facilities it offers and how comfortable it is to use. Mainly, we can highlight three advantages and these are the ones we will explain below:

USB all-in-one

One of the most obvious advantages of a USB with various operating systems, is that we will not need more than one memory to install our systems. In addition, we will have to install the systems in the root of the USB once, so we will not have to waste time every time we want to install a new operating system.

In addition, if we add help software and USB boot tools, we will have everything we need to keep our computer in optimal condition.

This is a fairly clear advantage over the traditional method of have multiple memories or USB. It is worth mentioning that this process can be used on any USB, even if it is write-protected.

Ease of troubleshooting boot problems

One of the most common failures of an operating system is startup, this problem occurs when a vital file is missing from the operating system. This makes it impossible to start the system normally. In general, this error usually occurs in Microsoft operating systems, so if you are currently using Windows it is something to consider. In these cases, the solution is to connect a device that has an original copy of the system, this way the files will be checked and the missing file will be restored.

The former thing was done through CDs original operating system. However, if we have a USB with multiple operating system, it will be very easy. This is because having multiple systems, you will only need to enter the flash drive and take the appropriate steps without having to change the unit.


Finally we have the most important reason, portability is very important for those who want to work with operating systems. As we know, USB drives are very portable and easy to take anywhere.

create a bootable Mac USB drive

This means we don’t have to carry so many items when we want to install or repair an operating system.

What requirements do I need to create a multi-boot USB?

To create a USB with various operating systems You will only need to have a USB with sufficient capacity (8 GB or more) and a handy wizard. These types of programs are usually free, so their use is limited to download and use. In addition, you will need to download a few additional files that we will detail below.

Software installed of your choice

As I mentioned, the first thing we will need to control is a program that allows us to upload multiple ISO images to the same drive. An example of this is WinsetupfromSB, which is a program developed for this purpose create startup units several ISO units. This to be able to have everything we need in the same USB.

Minimum 8 GB USB

Another requirement will be to have a memory or storage device that has or exceeds 8 GB of storage. Usually ISO they weigh approximately 3 GB Depending on the system, this means that we need a flash drive with enough storage space so that everyone can enter. One thing to keep in mind is that while 8 GB is usually enough, it’s best to start with 16 GB of memory or 32 GB of storage.

create a bootable Windows usb

This way you can upload other utilities on the same USB and you can have not only ISO

Download ISO images from the operating system

Eventually you will have to download some test systems, The original ISO can be obtained on official pages such as Ubuntu or Microsoft. They are completely free and if you need a license, it is purchased separately. It is important to download each of the ISO images before starting the installation.

How can I make a USB multiboot with WinsetupfromSB?

To use WinsetupfromSB correctly we will have to follow a few simple steps. Each of these must be followed to integrate each of the operating systems.

Insert USB into the computer

Of course, the first thing we need to do is connect the USB to the computer, so that it is later recognized by the system and the program.

Run WinsetupfromSB

Then you will have to open the program as we do with any other program, simply double click on it and then wait for it to load completely.

Click «Refresh»

When we have the program open, our USB may not appear logged in. This is a common thing, and the only thing we need to do to fix it is to click Refresh a few times until our unit appears.

create a multi-boot USB with winsetupfromusb

It’s important check the USB capacity let’s be 100% sure this is the one we’re going to use.

Select «Show disk drives»

Once the program has recognized our USB, it will be time to check an important option. To do this, we need to go to advanced options, clicking here will open a small window with many options. In our case we will have to mark «Display the disk drives‘and also’ custom menu names’. Then just click «X» to close the tab and continue.

«AutoformatFBinst» checkbox

If we look, right under the name of our USB, we’ll have a box called «AutoformatFBinst». This box must be checked yes or yes, its meaning is simple and by checking it we only indicate to the program that it must format the memory before installing the operating systems.

Choose «NTFS»

Checking the previous option will show us several additional options, among which will be NTFS. We will have to click on this option to indicate that we need USB in this format.

Select the operating system and the respective ISO image

For this step we will have to use the menus at the bottom of the program. If we look, there is an option for everyone type of operating system. If you want to install for example Windows 7, 8 and 10 on the same USB, you will need to check this option.

load Linux from a USB

Then you will have to mark the button that is just to the right, when you do it, a window will open where you will have to find the appropriate ISO to the system you want to install.

Run and finish USB formatting

when we mark the options, everything will be ready for installation and we’ll just have to check if all of the above are ready before we continue.

Install the chosen operating system

Then you have to mark the «GO» buttonWhen you do this, the program will ask us to accept some permissions for installation. In addition, we will be told that the drive will be formatted, all we have to do is click yes and then accept.

Repeat the installation of the missing ISO images

To install other operating systems We will only have to repeat the process mentioned above, but with each of the ISOs missing. It should be noted that every time an ISO is installed, the program will ask us for a name and we can put the one we want.