If when you connect your mobile device to a computer you are with the option of only «Just upload» This is more common than it seems, you just need to check if everything is working properly either on your mobile phone or on your computer.
First check if your PC does not detect the single charge and fix it, because often this uncomfortable problem occurs there, either for some configuration, system error or even a virus in the computer.
Then you can continue to check the cell phone battery, this does not harm. Many users comment and wonder why the phone only works with the charger connected, the answer is probably due to a battery failure therefore it will only work by charging.
Likewise, the mobile device can work by charging normally from its charger or from the computer, but in order to work from the computer, you must make the PC recognize the mobile phone first after performing this function and continue to charge it. use.
Also, if there is a malfunction in your battery, you need to learn how to calculate the duration of a 4000 mAh battery, which is a common or any, but to be the one in your mobile phone, then here, find out how to do we will show you because it only charges the terminal when the USB cable is connected from the computer.
What should I do if my mobile phone only charges when I connect it to my computer
This is a very easy process, as many users just need to connect their phone and find that it starts charging automatically without giving the option to transfer or transfer files better known as MTP communication.
It also creates frustration because we can’t find our USB connection device or computer to transfer photos to our computer, so the solution to this problem is probably found in our mobile phone. simple configuration.
First connect the USB cable to the computer and then continue to connect it to the phone, you will notice this several options appear, In them you may have checked the «load only» option, also, depending on the function you are going to perform, you will select the one that suits you best.
That is, to transfer files select the MTP protocol, in case of photo transfer the PTP protocol, that and many other options, which varies depending on the make and model of the mobile device.
Sometimes our terminal does not display the options window, it is simply activated in «load only» without any floating notification that tells us or shows us a way to change or remove this mode, so it’s just you. do it from the developer settings.
Enter the developer settings in the section «Purification» that way, you’ll be able to change the default connection mode and grant permissions so that future notifications are displayed when you make a USB connection, if you can’t find the developer mode, it’s because it’s turned off.
How to activate the developer mode
Continue activation varies slightly depending on the make and model of the mobile phone, but it is very similar in all, for this reason steps to display in the phone settings are as follows.
First enter the phone settings and scroll down to the last, in the last 3 options of this menu you will find something similar «About the phone» When you enter this section, you will notice many categories, you just need to locate the bar that says «compile».
When you locate it, keep pressing it repeatedly until floating information appears indicating «You’re a developer now,» Once you have done this, return to the main menu and you will be able to see the new option or configuration of the phone settings.
You will be able to make a large number of adjustments in this section, but the one we are interested in is the option «Just upload» we recommend that you change it to «Always ask when connecting to USB»Likewise, every time you connect your mobile phone to any computer, a window will appear that will allow us to choose the most useful option for that moment. Good luck!