Saltar al contenido

How to update Android on Samsung Galaxy A52 5G with Odin3

How to update Android on Samsung Galaxy A52 5G with Odin3

Update guide for Galaxy A52 5G with a version of the latest Android system using Odin 3 or, if necessary, restore to an earlier version if necessary.

With the following procedure we will not lose any of the data, applications or files installed on the mobile phone, but, optionally, we can also format it to perform a clean installation of the system.

In general, the most prudent thing is to back up the contents of your Samsung Galaxy A52 5G device, for this purpose the best thing to do is to use the free and official Samsung Smart Switch application.

Updating a Samsung Galaxy A52 5G mobile phone is a very easy task and will leave our mobile phone with the latest version of the rom, managing to solve in the same way any system problem that the terminal may present.

Next we will guide you to update the Samsung Galaxy A52 5G firmware.

How to update Samsung Galaxy A52 5G using Odin 3

In Samsung we need to go to settings and activate USB debugging from development options.

If these developer options are not enabled, we will need to enable them by entering About the phone -> Software information by pressing the box seven times construction number.

The first thing we need to do is download all the necessary files to our computer.

  1. I downloaded the latest version of Odin 3 for Windows.
  2. We also download the USB drivers for Samsung Galaxy A52 5G for Windows.
  3. And finally, we download the updated rom for Samsung and extract it from the computer.

Then we install the USB drivers for our phone on our computer and launch the Odin3 tool.

We turn off Samsung Galaxy A52 5G and start it in download mode, for this we hold down the keys at the same time smaller volume + start + power to release them even when the download mode warning screen appears.

Then, after releasing everything, press the volume up button to accept.

Once in the download mode, we launch the Odin software and connect our mobile phone to the computer via the USB data cable, at that moment we will see the word added in the Odin window.

Odin3 Galaxy A52 5G AddedAdded Odin3 Galaxy A52 5G

The latter means that everything is going well and that communication between the Samsung Galaxy A52 5G and the program is possible, otherwise we will have to check the USB port, the cable and, if necessary, reinstall the drivers.

Then, we just need to send the firmware files to Odin 3 by clicking on the corresponding button.

For this step, we first click on the button [BL], navigate to the folder where we extracted the rom and open the file that starts with BL_ by clicking open.

We repeat the same thing with the AP_ and CP_ files.

In this step, before pressing the CSC button and preparing to upload the corresponding file, we will have to think about the term79. how to do in the Samsung Galaxy A52 5G terminal.

  1. Reinstall and / or repair your Android system without deleting or modifying applications, data, or files.
  2. Or clean and lock the firmware from scratch so that the content as well as settings and accounts are deleted.
  • To update the Galaxy A52 5G ROM by reinstalling the system while retaining the content, we will need to use HOME_CSC_.
  • To update the Galaxy A52 5G ROM with the option to format the mobile phone to get a clean system, we will upload the CSC_ file instead.
Odin3 Upload Samsung Galaxy A52 5G firmware filesOdin3 Upload Samsung Galaxy A52 5G firmware files

Note: It is recommended that you always use the HOME_CSC_ file, unless your system is corrupted or infected with malware.

After loading the components we saw in the previous step, click Start to begin the upgrade process.

Odin3 Galaxy Succeed 1 Failed 0Odin3 Galaxy A52 5G Failed 1 Failed 0

Finally, we wait a few minutes while the progress bar completes and the Galaxy A52 5G restarts, just then we have to disconnect the USB cable, exit Odin and wait a few seconds until our device finishes booting.