Saltar al contenido

DRIVER_IRQL_NOT_LESS_OR_EQUAL Stop error in Windows 10

DRIVER_IRQL_NOT_LESS_OR_EQUAL Detener el error en Windows 10 2

This article contains step-by-step instructions on how to fix it IRQL DRIVER ARE NOT SMALLER OR EQUAL Blue screen error caused by iaStorA.sys, iaisp64 sys, Netwtw04.sys, nvlddmkmkm.sys, ndis.sys, wrUrlFlt.sys, rtwlane.sys etc., Windows 10/8/7 driver files. This indicates that a driver in kernel mode attempted to access pageable memory in an IRQL process that was too large. Let’s see how to fix iaStorA.sys BSOD error in Windows 10. The procedure will be the same for other files. Basically, you need to update, reinstall, or reinstall the driver in question.

DRIVER_IRQL_NOT_LESS_OR_EQUAL Stop error in Windows 10 1

DRIVER_IRQL_NOT_LESS_OR_EQUAL

TheiaStorA.sysfile is a software component related to Intel Rapid Storage Technology from Intel, a software solution supported by Intel Smart Response Technology. Allows the computer to communicate with the hardware or any other connected external device. Intel fast storage technology enables PCIe or peripheral components Support for Express Interconnect, Serial ATA RAID or Redundant Array storage of independent disks 0, 1, 5 and 10, as well as Power On Standby (PUIS).

1. Remove the IRST or Intel Rapid Storage Technology drivers

Now, you will need to repair the WiFi controller or Ethernet controller on your device. It should be noted that this method works on all editions of Windows 10, including Windows 10 Home.

First, start by pressing the WINKEY + R button combination to start the Run utility. Now write devmgmt.msc and press enter .

This will open the Device Manager for you. Now click on the entry labeled as IDE ATA / ATAPI controllers and extend it.

DRIVER_IRQL_NOT_LESS_OR_EQUAL Stop error in Windows 10 2

> Then right-click on all correctly labeled driver entries and click Uninstall the device .

Restart the computer to see if the problem is resolved or not.

2. Update the IRST or Intel Rapid Storage Technology drivers

If even after uninstalling your driver, if the problem with the blue screen due to iaStorA.sys does not go away, it is probably because the drivers are corrupt or incompatible with the version of the operating system that you are using. Therefore, to fix this, you will need to update your drivers.

You can do this by visiting the original equipment manufacturer’s website. And in the drivers section, get the latest version of your device and try to overwrite it.

Or you can open Device Manager. Then click the entry labeled as IDE ATA / ATAPI controller and extend it.

DRIVER_IRQL_NOT_LESS_OR_EQUAL Stop error in Windows 10 2

> Then right-click on all correctly labeled driver entries and click Update the driver .

Restart the computer to see if the problem is resolved or not.

You can also use Windows Updates in the Settings application to check for new updates available.

Luck!

: You may receive a 0x00000000D1 error, which is a DRIVER_IRQL_NOT_LESS_OR_EQUAL error after activating an iSCSI initiator data summary setting that uses CRC or checksum in Windows 7.

Related reading : Fix IRQL_NOT_LESS_OR_EQUAL error.

Similar Content